This Single Spiked Pole Light comes with a rotatable head attached to a tall spiked pole. It's perfect for accentuating garden elements and illuminating pathways so it's safe to walk during the night. It's tested and approved to IP65 (fully dust-tight and watertight against low-pressure jets). The polished copper construction is highly resistant to corrosion and stands out in any setting. Globe, transformer, and switch controls are not included.
Read more
See shipping information.

Waterproof Landscape Pole Light with Long Spike
- DURABLE - Features a polished copper finish that is corrosion-resistant, making it ideal for outdoor use; the warm and authentic colour also sets it apart in any setting
- CONVENIENT- A safe and practical lighting technique that enhances any modern outdoor landscape especially at night time
- HIGH STANDARD - Dust tight and weather proof; tested and approved to IP65 rating (Install with waterproof connections and circular cable to avoid moisture ingress)
- FLEXIBLE - Can be easily repositioned to achieve the perfect illumination as seasons change; the single head is also tiltable and rotatable
- SAFE CONNECTION - Safe to install and use; requires two-wire low voltage connection (Connector not included)
CLA Lighting - Innovative and Energy-Saving Lighting
CLA Lighting offers benchmark technology in its diverse array of indoor and outdoor decorative lighting, high-quality energy-saving lamps, and trendy lighting fixtures for commercial, industrial, and residential use. CLA provides quality products at competitive prices that are energy-efficient, eco-friendly and comply with Australian/New Zealand standards.
Specifications
- Height: 1000mm
- Height of Head: 110mm
- Diameter of Head: 60mm
- No. of Head/s: One (1) adjustable head
- Swivel: 90° tilt & 270° swivel
- Globe Included?: No
- Lamp Base: GU5.3
- Globe Connection: 1 x MR16
- Globe Compatibility: Accepts LED or max. of 20W halogen globe
- Cable Length: 900mm (Included in the box)
- Cable Placement: 380mm from the bottom end of the spike
- Material: Solid copper
- Finish: Polished
- Corrosion Treatment?: Yes
- Input Voltage Range: 12-25V AC/DC
- IP Rating: IP65 (Dust tight and weather proof)
- To maintain the IP rating, use circular cable in junction
- For parallel and single connection, use an appropriate IP68 connector (CONN01, CONN02)
- Globe, transformer, and switch controls are not included.
Choosing the Right LED Driver for Your Outdoor Light
Complete your outdoor lighting setup with compatible MR16 bulbs and waterproof control gears from CLA Lighting. Since MR16 globes run on low voltage (often at 12V), they require a power transformer to make sure they work properly. When choosing a transformer or LED driver, you have to consider the number of bulbs you want it to power multiplied by the wattage. It's advised that the total wattage of all bulbs should not exceed 80% of the driver's wattage. For example, if you choose to power 4 x 6W MR16 globes (total of 24W) from one LED driver, a 30W driver is required. See table below for a more detailed reference.
Recommended Globes | Type | Wattage | Recommended Control Gears to Run Globes | Type | Min-Max Load | Qty of Globe/s per Control Gear |
CLAMR16FNVCESH35W | Halogen | 35W | ETH50.302VA | Transformer | 10W-40W | 1 |
MR1601A MR1602A |
LED | 6W | ETH50.302VA | Transformer | 10W-40W | 2-6 |
CLA111011 | LED Driver | 1-8W | 1 | |||
CLA113011 | 3-24W | 3 | ||||
CLA115011 | 5-40W | 5 | ||||
CLA1110011 | 10-80W | 10 | ||||
CLA1115011 | 15-120W | 15 | ||||
CLA1120011 | 20-160W | 20 | ||||
OTTER1 | 1.2W-9.6W | 1 | ||||
OTTER5 | 15-120W | 15 |
Dimensions
Installation
This product must be installed by a licensed electrician. Installation instructions sheet is provided in the product box.
Warranty
2 year replacement warranty. Conditions apply - See Terms and Conditions of Trade.