This Citizen 10W Bathroom LED Downlight Kit with an IP rating of IP66 is a bathroom safe LED light powered by a Japanese manufactured LED chip. It's the ideal solution to replace your existing halogen downlights, or to fit out a new bathroom with the latest and safest technology. Being IP 66 rated, this LED Downlight is "dust tight" and is protected against powerful jets of water, making sure your bathroom lighting is safe.
Future proof your house now and reap all the economic, safety, and environmental benefits of LED lighting - start saving big dollars! This kit includes a transformer specifically designed for this light so that it will be 100% compatible, and deliver the performance the light is designed to deliver. Best of all it is a DIY product as it comes with a standard Australian power plug (most new houses have power points in the ceiling for lighting - if you don't then your electrician can wire it in minutes).
A LED light is superior to a LED retrofit globe
Replacing the whole light fitting is a superior concept to just replacing the halogen globe. There are LED globes that replicate halogen globes. However, they are constrained by the traditional size of of the halogen globe and therefore have smaller heat sinks and therefore shorter life expectations. In simple terms: we suggest a replacement of the entire light and transformer setup rather than just the globe. That way you can be completely assured of its compatibility with your household electricity, and get the most out of the new technology.
Do not change a globe for 25 years!
Citizen, the well known Japanese innovator in electronics, produces the widely acclaimed CitiLED LED chip that drives this light. The leading luminous flux and luminous efficacy of their technology means the light produces more lumens per watt. That means you will use less electricity to get the brightness you need. CitiLED chips also have low heat generation vs comparable LED sources which means they are more durable and can be expected to last longer - truly a technology that is designed to continue to provide illumination for the next generation. All chips are RoHS compliant so you can be comfortable they have been produced in an environmentally friendly way.
An Australian brand focused on green energy LED lights for Australia. Aside from simple installation procedures and quality workmanship, Limelight LED's are energy-efficient and safer than traditional incandescent light bulbs that waste 90 percent of the energy they consume on heat. Limelight LED Lights consume only one-third of the energy used to operate traditional light bulbs. Limelight LED Lighting delivers an environment friendly way of stylishly making your home and mother earth a better place to live in. Limelight - the "new green" in LED lighting
Finally - a LED light designed to just work
The design and construction of this light sets it apart from many on the market. It is designed to replace the entire existing downlight fitting. It will simply fit in a standard 70mm to 75mm diameter (standard halogen down light) ceiling hole. IMPORTANT: Unlike most LED lights on the market, the LED transformer (driver) that comes in this kit has been specifically manufactured for and tested within the Australian market. This means it is capable of modulating for Australia's variable power surges and spikes.
What LED down-light colour is right for me?
Selecting a suitable colour for your room is important as it can affect the mood of the room. Whilst the resulting colour of any light will be dependent on the wall and ceiling colours, furnishings of the room and the source and extent of natural light, the image above provides a guide as to the relative colour comparison of the three main choices:
- Warm white (approx. 2800K to 3000K)
- Natural white (approx. 4000K to 5000K)
- Cool white (approx. 6000k)
3 year manufacturer warranty against manufacturing faults. If the transformer is being hard-wired it must be installed by a qualified electrician to maintain warranty. See product documentation and our Returns and Warranties Policy.
Members get free shipping (unless otherwise highlighted)
Members of Renovator Store enjoy FREE DELIVERY within Australia! Signup to be a member now - it's free!
Guest shipping rates
For those that prefer to shop as guests shipping will be charged at the flat rate of $9.50, or 5% of the cart total (whichever is greater).
Some bulky items incur special freight charges. See product page/cart for details.
For floorboard delivery information click here
Unless otherwise stated, orders are typically despatched within one business day. If an order is made after hours or on non-business days it is deemed to be made on the next business day - so, for example, an order made on the weekend will be queued for despatch on the Monday, and is typically despatched that day or the following business day. If you order before 10am on a business day we make best efforts to despatch it the same day.
Delivery timeframes are dependent on your location, which distribution centre we are sending from, the size and number of parcels, and the schedules of the carrier. Australia Post and Toll Ipec are our preferred carriers, although sometimes other carriers are utilised. In most cases the average delivery times we observe are:
|VIC Metro||1 to 3 business days|
|VIC Regional||2 to 4 business days|
|NSW Metro||2 to 4 business days|
|NSW Regional||4 to 6 business days|
|QLD Metro||3 to 5 business days|
|QLD Regional||4 to 9 business days|
|TAS, SA, WA and NT||3 to 9 business days|
These are average delivery times and we often observe shorter and longer timeframes. Renovator Store cannot control delivery timeframes and processes, and your first point of communication on a delivery is the carrier.
To see more detailed estimated delivery timeframes visit our Estimated Shipping Times page.
Your order might arrive in separate deliveries
An order might come in multiple parcels. Sometimes we might send your order in more than one package or from different distribution centres, and they may arrive at different times.
How can I track my order delivery?
In most cases you will be sent instructions by email on how to track your delivery once your order has been completed. In some cases tracking information is not available. If you are concerned about the progress of your delivery the fastest way to get information is to contact the carrier and quote the tracking number. We can only see the same tracking information available to you.
What if I am not at home to accept delivery?
Australia Post and Toll typically require a signature upon delivery and our nominated couriers typically deliver only during business hours. So it is best to provide a shipping address that will be attended during business hours. If someone is not available to accept the goods the standard practice is to leave a card informing you how to collect at your local Post Office or for re-delivery.
You can put a short note on your order on the order checkout screen to provide delivery instructions, however Renovator Store cannot guarantee the carrier will observe these requests.
We can deliver to an Australia Post Parcel Locker
For a single item purchase you can easily arrange for delivery to an Australia Post parcel locker. There are 200 locations across Australia (also at 7-Eleven Stores and BP Service Stations) that are accessible 24/7 and free to arrange. They will email and SMS you when its ready to collect! See the details here.
Money Back Guarantee
We want you to be completely satisfied! We offer a 30 day money back guarantee for members (14 day for guest purchasers) across all products except flooring products, custom-made products, fire-extinguishers, and gift cards. If you wish to return your delivered product, simply email us and we'll arrange the product to be returned and to refund you (less Delivery Costs). Terms and conditions apply. See our Money Back Guarantee Terms and Conditions for more information.
Please see our returns policy here.
Product HintsNo tips or advice available
Please Submit a Review
Have you thought about: