Under-tile heating is a must if you wish to avoid the harshness of stone cold tiles in winter. You can set on/off times throughout the day or control it manually or by a thermostat. These systems add value to your home and cheap to run due to their low watt usage.
The Hotwire system is the simplest to install and perfect for a DIY project. It is the only system that can be installed into small spaces so you have no cold spots. The kit includes a fully SAA compliant heating element and programmable touch screen thermostat/timer controller. Full DIY installation instructions and videos are available - or we have many recommended installers Australia-wide.Read more
Item dispatched in 1 - 3 business days.
All our products are stocked in Australia and are ready to ship to you.
Benefits of Under Tile Heating
Invisible heat - a natural feeling of warmth with no fans or ducts
On demand - fast to warm up (circa 30 minutes)
Warm floor - warmth where you need it the most
Asthma and allergy friendly - no air or dust movement from ducted heating
Cheap to run - about 2c per square metre per hour (at average household electricity prices and room size)
Dry floor - the heat dries floors and reduces chances of mould and cleaning requirements
Better bathrooms - as heat lamps are not required exhaust fans can be placed over showers
Programmable - automatic heat for when you need it and temperature controls
Easy installation - most versatile installation method available. You can DIY the heating element
Sleek controller - highest quality touch-screen wall controller with backlight and 24/7 timer functionality
Temperature control - floor or room sensor to thermostatically control by temperature
Safe - cable is only circa 50°C so tiles will not crack
Compact - heating element is only 4mm thick
Maintenance free - Once installed it is maintenance free.
Under tile heating can augment your existing heating or be a total solution
Many homeowners believe that under-floor heating is not necessary when they are installing other home heating solutions. This is simply not the case - whilst under-tile heating can be used to heat a room, it can also be used to simply heat the floor. Have you ever been in a traditionally heated tiled room? The room feels warm at head hight, but the floor is cold and it is not comfortable walking in bare feet. Under-floor heating can be your entire heating solution, or it can simply augment your other heating systems.
Did you know that ducted heating can cause a temperature difference of up to 12 degrees between the floor and ceiling? Under Tile Heating heats uniformly form the floor to ceiling and will also save you hundreds of dollars in the long run compared to bathroom heat lamps. As a total bathroom heating solution its running costs compare very favourably to other heating solutions such as heat lamps - see below.
HOTWIRE Under-Tile Heating is the most flexible system available
Unlike many other under floor heating products that are expensive to buy, install, run and maintain, the HOTWIRE Under Tile Heating DIY kit enables you to do most of the work yourself and will only need the service of an electrician to connect the controller to the power once the hotwire has been laid. The flexibility of using a coiled wire verse a conventional heated mat makes installation so much easier, especially when laying in small tricky spaces around toilets and doorways. The heated HOTWIRE coil can simply be laid down on your homes substrate and taped in a coiled design before laying tiles on top. Therefore, your room will be warmed evenly leaving no cold spots to freeze your toes. Watch the instructional video below to see why Hotwire under tile heating is the most versatile on the market.
What's in the under tile heating kit?
The kit includes everything you need for installation:
The roll of 4mm thick heating element wire to layout on your prepared floor
A roll of heavy duty tape to adhere the heating element to the floor
A thermostat sensor to connect to the controller
A touch screen controller (must be connected by an electrician to mains)
A continuity alarm - will alert you to any break in the circuit or damaged cable
Full instructions (also see video below)
Easy to Install
The primary benefit of our HOTWIRE Under-Tile Heating DIY Kits is the ability for it to be installed almost entirely yourself. Due to Australian standards, a licensed electrician must connect the thermostat to the power source however this is the last step and the rest of the installation can be done yourself. With our in-depth and easy-to-follow installation instructions, save yourself hundreds of dollars by installing the product yourself!
The installation process involves priming your floor surface and simply coiling your HOTWIRE around your entire floor surface at even intervals before taping down in place. All tape, wires and necessary installation equipment are included.
Click on the manual buttons below for a 20 page step-by-step guide for your HOTWIRE Under Tile Heating Installation and for the Pre-Wire Instructions
How to measure your floor?
The length of your HOTWIRE Under Tile Heating coil is based on the square meter-age of space that you would like to cover. Generally, this doesn't include the area under fixed units such as vanities, cupboards, baths etc.
Once the square meter-age of the room or space you want to heat has been determined, select the corresponding range in the product options section and your price will be calculated.
For example say your bathroom is 4 square meters but with a permanently fixed vanity and shower, only 3 square meters of tiling will be pulled up. You will select the 2.60 - 3.30 range from the product options drop down box. The calculated price includes all of the installation hardware within the kit as well as the touch screen thermostat.